Reverse Osmosis

How to Remove Arsenic from Well Water: Whole House and Under-Sink Options

Arsenic has no taste, color or smell, so testing is the only way to know. Here's how to test your well and choose between whole house treatment and reverse osmosis.

Aquiowell Water Team November 11, 2026 · 4 min read

Key takeaways

  • Arsenic has no color, taste or smell. A lab test is the only way to know whether your well has it.
  • The EPA limit for public water is 10 ppb (0.010 mg/L). Private wells aren't regulated, so testing is up to you.
  • Two proven routes: a whole house arsenic filter with adsorptive media, or reverse osmosis at the kitchen tap.
  • A water softener does not remove arsenic. Always retest after installing a system.

Arsenic is one of the most common reasons well owners call us, and one of the most misunderstood. It occurs naturally in rock and soil in many parts of the US, gives no warning signs, and isn't removed by the filters most people already have.

The good news: arsenic is well understood and treatable. This guide covers how to test for it, which treatment options work, and how to choose between a whole house system and a drinking water system.

Where arsenic in well water comes from

Most arsenic in groundwater comes from natural deposits in the bedrock and soil. It can also come from past mining, metal processing or farmland where arsenic-based products were once used. As water moves through the ground, small amounts dissolve into the aquifer your well draws from.

Because it's geological, arsenic levels can vary a lot between neighboring wells. One house can test clean while the next one doesn't.

Why arsenic matters

The US EPA classifies arsenic as a carcinogen and has set a maximum contaminant level of 10 parts per billion (0.010 mg/L) for public water systems since 2006. That rule doesn't apply to private wells: the EPA's private well guidance puts testing and treatment in the owner's hands.

Arsenic is mainly a concern for water you drink and cook with. That's why both whole house and point-of-use treatment can be valid, depending on your levels.

Step 1: Test your well

  • Use a certified lab. Your state or county health department can point you to one. Home test strips are fine as a first check, not for choosing a system.
  • Ask for total arsenic, and ideally arsenic III vs arsenic V. The University of Georgia Extension notes that arsenic III is harder to remove; many systems need it oxidized to arsenic V first.
  • Test the rest too: iron, manganese, pH, hardness and sulfate all affect which system works best and how long its media lasts.

Treatment options compared

Option Treats Best for Keep in mind
Whole house arsenic filter (adsorptive media) All water entering the home Higher levels, or households that want every tap treated Larger upfront cost; media has a rated capacity
Under-sink reverse osmosis One faucet for drinking and cooking Lower levels and tighter budgets Check the system's arsenic data or NSF/ANSI 58 listing
Both combined Whole house plus a polished drinking water tap High levels or maximum peace of mind Highest cost, most thorough result
Water softener Hardness only Not an arsenic solution Doesn't remove arsenic

How a whole house arsenic filter works

The Crystal Quest Arsenic whole house filter is a good example of the adsorptive approach. Water passes three stages:

  1. A 20" sediment cartridge catches sand, silt and dirt.
  2. A mineral tank of Eagle Arsenic Oxide media captures arsenic as water flows through.
  3. A 20" carbon block reduces VOCs and remaining chemicals.

It's rated for 1,000,000 gallons with 9 to 13 GPM of service flow depending on size, with an automatic backwash. Crystal Quest recommends adding the softener option, because the media can increase hardness.

Reverse osmosis for drinking water

If your levels are modest, or arsenic is your only issue, a reverse osmosis system at the kitchen sink is a practical and much less expensive route. RO membranes hold back a wide range of dissolved substances.

Look for an RO system whose certification or test data specifically covers arsenic, and remember that arsenic III is harder for RO too, which is another reason to know your arsenic type. Compare options in our under-sink RO systems, such as the Crystal Quest Thunder or Aquasure Premier.

Step 2: Retest after installation

Whatever you choose, test your treated water a few weeks after installation, and then at least once a year. It's the only way to confirm the system is doing its job and to know when media or filters need replacing.

Common questions

Can I boil water to remove arsenic?

No. Boiling evaporates water and can actually concentrate arsenic. Treatment or an alternative water source is needed.

Is it safe to shower in water with arsenic?

Arsenic is mainly a concern for drinking and cooking, because very little is absorbed through the skin. If your levels are high or you prefer every tap treated, a whole house system covers showers too. Ask your health department for guidance on your specific levels.

Does a water softener remove arsenic?

No. A softener removes calcium and magnesium. For arsenic you need adsorptive media, reverse osmosis, or another method designed for it.

How often should I test my well for arsenic?

Test before choosing a system, a few weeks after installing it, and then at least once a year.

Does a whole house arsenic filter also remove other contaminants?

The Crystal Quest system includes sediment and carbon stages, and a SMART filter option for chlorine, chloramine and other chemicals. Check each product page for what it's designed to reduce.

Got arsenic in your well test? Send us your results, or call +1 657-837-2821 (Mon-Fri, 9-5 EST). We'll help you choose between whole house treatment and RO, or a combination. Browse all whole house water filters.

Shop the systems in this guide

  • arsenic
  • Well Water
  • well water testing
  • whole house filter

Aquiowell Water Team

Our team helps US households choose, install and maintain water filtration and treatment systems. We write hype-free guides based on manufacturer data, independent sources and the questions our customers ask every day.