Echo H2 | Hydrogen Water Machine with 5-Stage Filter

The Echo H2 is a hydrogen water machine with built-in filtration: one unit that filters your tap water through five stages and then infuses up to 1.44 ppm of dissolved hydrogen. It works on the countertop as well as out of sight in the cabinet; your water's pH stays the same in either case.

Filtered water and hydrogen from one machine

The H2 needs no separate filter system. Its WQA-certified cartridge removes chlorine, metals and sediment, and the hydrogen cell then adds the molecular hydrogen.

• Five filter stages: aimed at chlorine, heavy metals, particles, iron, hydrogen sulfide, microorganisms and scale, plus taste and odor.
• Neutral pH: the gas goes directly into the water, with no ionizing and no mineral cartridge involved.
• About a year per cartridge: one filter handles 1,056 gallons, and swapping it takes no tools.
• American made: its design, engineering and assembly all happen in the US.

Countertop or under-sink installation

On the counter

Hook it up to the cold water line, plug it in and you can pour. No plumber is needed, setup takes about ten minutes, and the flexible spout fills your glass directly. Because nothing is built in, the machine can come along when you move.

Under the sink

Here the unit sits in the cabinet, with the Echo H2® Faucet in a free 15/16 to 1 inch countertop opening as a separate tap for filtered hydrogen water. This setup requires that faucet and 14.5 inches of clear cabinet height.

Small enough for your kitchen

At 14.5 inches tall, 10.5 wide and 6.5 deep, in brushed stainless steel, it uses about as much counter as a coffee machine.

• Hydrogen cell: dissolves 99.99% pure molecular hydrogen into the filtered water, without changing the pH.
• 1.2 L/min flow: quick enough for filling bottles, on the counter and through the Echo faucet alike.
• Digital display: shows machine status and remaining filter life, so you know when a new cartridge is due.

Common questions